GPS/GNSS Module for Raspberry Pi Pico with Antenna

Description: The Pico-GPS-L76B is a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it's easy to use global navigating function.

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
• Multi satellite systems support: GPS, BDS, and QZSS
• EASY, self track prediction technology, help quick positioning
• AlwaysLocate, intelligent controller of periodic mode for power saving
• Supports D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
• UART communication baudrate: 4800~115200bps (9600bps by default)
• Onboard battery holder, supports ML1220 rechargeable cell (not included), for preserving ephemeris information and hot starts
• 4x LEDs for indicating the module operating status
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Specifications:

• Frequency band:
  GPS L1 (1575.42Mhz)
  BD2 B1 (1561.098MHz)
  • Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch
  • C/A code
  • SBAS: WAAS, EGNOS, MSAS, GAGAN
• Horizontal position accuracy
  (autonomous positioning)
  • <2.5m CEP
• Time-To-First-Fix @ -130dBm
  (EASY enabled)
  • Cold starts: <15s
  • Warm starts: <5s
  • Hot starts: <1s
• Sensitivity
  • Acquisition: -148dBm
  • Tracking: -163dBm
  • Re-acquisition: -160dBm
• Dynamic performance
  • Altitude (max): 18000m
  • Velocity (max): 515m/s
  • Acceleration (max): 4g
• Others
  • Communication interface: UART
  • Baudrate: 4800~115200bps (9600bps by default)
  • Update rate: 1Hz (default), 10Hz (max)
  • Protocols: NMEA 0183, PMTK
  • Power supply voltage: 5V
  • Operating current: 13mA
  • Overall current consumption: < 40mA@5V (Continue mode)
  • Operating temp: -40℃ ~ 85℃
  • Dimensions: 52 x 21mm

WIKI: https://www.waveshare.com/wiki/Pico-GPS-L76B