PoE Adapter - Power Embedded Web Server or Board taken from Ethernet Line

Description: The MOD-POE-V2 board extracts power from the UTP LAN cable network, so you can power your embedded device with 5 or 12VDC, and power and Ethernet are carried at the same cable. Note that the LAN cable should be connected to a PoE-compatible switch/router.

IMPORTANT NOTE! The MOD-POE-V2 follows the recommendations set by IEEE 802.3af-2003 standard. MOD-POE-V2 is not compatible with MOD-POE injector (because it needs higher input voltage).

Features:

• Si3402 PoE controller with DC-DC step down converter and PoE protocol negotiation
• Power output is selectable via a switch - 5 / 12 VDC
• Dimensions: (54 x 39)mm ~ (2.12 x 1.54)"

Documents: MOD-POE-V2 Schematic

NOTICE: Evaluation Board/Kit Important Notice