A7600E LTE Cat-1 HAT for Raspberry Pi - Low Speed 4G Module, 2G GSM / GPRS

Description: A7600E LTE Cat-1 HAT for Raspberry Pi, Low speed 4G module, 2G GSM / GPRS support, LBS positioning

Features:

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards (2,3,4), Jetson Nano
• Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL
• Supports dial-up, telephone call, SMS
• Supports LBS base station positioning, it is able to get the approximate position info via mobile network
• TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words
• Onboard USB interface, for testing AT Commands, network communication, and so on
• Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
• Onboard USB to UART converter, for serial debugging, or accessing the Raspberry Pi
• Breakout common used control pins of the A7600X module, make it easy to connect with hosts boards like Arduino/STM32
• SIM card slot, supports 1.8V/3V SIM card
• TF card slot for storing data like files, audio data, etc.
• 2x LED indicators, easy to monitor the operating status
• Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via 0Ω resistor jumper
• Baudrate: 300bps ~ 4Mbps (default: 115200bps)
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

• LTE Cat-1: LTE-FDD: B1/B3/B5/B7/B8/B20
  LTE-TDD: B38/B40
• 2G: GSM/GPRS/EDGE: 900/1800 MHz
• SMS: Supported types: MT, MO, CB, Text, PDU
  Storage: USIM card and ME (default)
• Audio feature: Supports echo cancellation, noice reduction
• Power supply: 5V
• Operating voltage: 5V / 3.3V (configured via 0Ω resistor jumper)
• Operating temperature: -30°C ~ 80°C
• Storage temperature: -45°C ~ 90°C
• Dimensions: 56.01mm × 65.00mm

WIKI: A7600E_Cat-1/GSM/GPRS_HAT